Electric Water Gun

Enhanced Performance
An electric water gun indeed has the highest performance with regard to effect. You control the battlefield and eliminate your enemies as water warriors provide you with enhanced powers of range and range.

Convenience and Simplicity
Nowadays, physical pumps can be replaced by electric water guns. Just a push of a button and water, water everywhere, chaos everywhere! Handy, readily, and unbelievably in a water duel.

It is constructed using high-quality material. The electric water gun toy is constructed of premium ABS material. Durable, secure, and non-toxic, they are evaluated for kid safety. Your child’s hands are protected by the rounded edge design.

Amazing Shooting Experience. Unlike squirt guns, which vibrate or recoil when fired, the electric water gun can improve your shooting efficiency. Both kids and adults may enjoy using the water cannon. Its shooting range is 22 feet or greater.

Decent Water Capacity. Children’s water blasters can store 11.7 ounces of water, and the water column they release is relatively thin, extending the life of the toys. It can blast up to 40 feet and instantly unleash massive explosive force to overwhelm opponents.

Easy to Use. The one button design makes use convenient for both adults and children. For a great day at the pool or beach, you must pull the trigger once to start the water spraying out. All you need to do is soak in water and immediately absorb water; after sealing, it is firmly sealed, and there is no leakage; push the trigger; easy to shoot, excellent for family amusement and water battles, and adults can go out and have fun with the kids.

Some miscellaneous features of an electric water gun include:
The air tank that holds compressed gas is usually placed in the butt area, and it takes 2-4 hours for the weapon to fill with compressed gas.

Most of the time, the sound of the firing gun comes from the mechanism inside and not outside the gun.

Usually, they cost around $40-$60, depending on the type of material used, such as plastic or rubber.

The reservoir size for holding water often depends on whether you purchase a single-shot device or one meant for continuous usage.

They’re relatively inexpensive compared to similar toys, and kids like to play with them because they’re fun to shoot, although they require frequent refilling.

The working principle of electric water gun mainly relies on the electric motor to drive the liquid pump to work, and spray water out through pressure.

Electric water guns are usually composed of several key parts, including backpacks, water bags, liquid pumps and water guns. These components work together to enable electric water guns to spray water efficiently. Specifically, electric water guns use lithium batteries as energy to drive motor-driven liquid pumps to work. This design allows the water gun to have a variety of spraying methods, such as fan-shaped, direct current and physical and chemical spraying, with a maximum range of up to 12 meters. The volume of the water bag is usually 22 liters. When using it, it is necessary to pay attention to the water temperature must not be higher than 60℃, and acidic liquids cannot be added.

In terms of operation, the gun head of the electric water gun is equipped with a variable integrated nozzle, allowing users to adjust the spray mode as needed. When using an electric water gun, you first need to charge the device. After charging is completed, open the waterproof plug and press the power button to start the water gun. The white part of the gun head enters the water at a 45-degree angle, and pushes the trigger forward to absorb water with one click. If you can't absorb water, you can push the trigger back and forth repeatedly. When the water volume reaches 100%, the water absorption process is completed and you can start shooting. Each shooting interval is 1 second. Press and hold the trigger for 3 seconds and then release it. Pull the trigger again to get more water. When the water level shows 0%, pull the trigger to release the last strong water jet until all the water in the water tank is emptied. Note that all the water must be emptied before shutting down each time.

In addition, some electric water guns are also equipped with peristaltic pumps. This pump rotates counterclockwise through the roller, and the rotor rolls over the latex tube to lock it, pushing the air in front of it out of the launch port. Subsequently, the latex tube rolled over by the rotor returns to its original shape and generates negative pressure to attract the water in the water storage tank into the latex tube. This design allows the latex tube to continuously have water available for firing, thereby achieving water spraying.

The principle and structure of electric water guns mainly involve several key parts and working mechanisms. Electric water guns are usually composed of water suction pumps, solenoid valves, water storage rubber tubes, three-way pipes, battery boxes and other parts. Its working principle is to close the water spray port through the normally closed solenoid valve, and the water suction pump sucks water into the rubber water pipe for pressure storage. When spraying water, the solenoid valve opens the water spray port valve, and the water is squeezed out and sprayed by the pressure of the rubber water pipe. The principle of this toy water gun is similar to that of a simple water gun, both of which rely on the pressure of the elastic rubber tube to squeeze and spray water.

The internal structure of the electric water gun is relatively simple, but it is fully functional. It includes a water magazine, which is a modularly designed water storage compartment with a water storage capacity of up to 300ML. The water gun clamps the water magazine through the magazine latch, and is fixed with a double latch that the soft bullet launcher does not have to ensure stability. The water magazine has a water storage capacity of 300ML, which is the smallest among all modular water storage tanks, but there are several other modularly designed water storage tanks, such as 740ML square water drum, 600ML banana magazine and 1100ML round water drum, etc., to meet different needs.

The water filling port of the water magazine is designed at the bottom of the magazine, which is convenient for filling with water, and is equipped with an anti-lost anchor design to prevent the cover from detaching from the water magazine. The suction pipe is divided into two parts-the water gun part and the water magazine part, in which the suction pipe of the water magazine part is equivalent to the front end of the suction pipe. The filter cap is located at the head of the suction pipe to prevent large foreign objects from entering the suction pipe launch tube. It is especially important for electric water guns using peristaltic pumps, because foreign objects will cause the rotor to be unable to effectively lock the hose, thus failing to achieve firing.

The electric water gun is also equipped with a variable integrated nozzle, which has three spraying modes: fan-shaped, direct current, and physical and chemical, with a maximum range of up to 12 meters. The working pressure of the liquid pump is 0.7 MPa, with overload protection function. The electrical part of the whole machine has short circuit protection and waterproof measures to ensure safe use.

We attach importance to catching new trendy toy information in market and always enthusiastic to serve in the best way in every parts including product quality, production time and transportation and after-sales service.